Buy in 3 easy steps

It’s free and it only takes 4 minutes

Showing 1–40 of 110 results

  • Sale!

    Belling Bucket

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Adjustable cutting arms can meet the specific requirements of different reaming diameters;

    After reaming the bore hole, convey spoil with drilling bucket or cleaning bucket;

    Cutting arms are easy to spread and retract; box-type structure is easy to maintenance;

    Applicable layers: hard stratum, frozen soil and medium soft rock.

    Customizable ltems

    Model DIA. Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Key Component Reinforce Custom : strengthen the key component to extend life cycle;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc;

    Swing No. Custom : double swing or trible swing design as demand;

    Limit Hole No. Custom : add more limit hole to satisfy different reaming diameter demand.

    Sizes In Length

    Normally 3050 / 3100mm/4000mm, other avaliable upon request,prolong or shortten.

  • Sale!

    Cleaning Bucket

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Choose conical or straight bucket according to different working conditions;

    Choose straight guide plate or no guide plate according to different working conditions;

    Applicable scope: cleaning spoil at pile bottom, soft layer.

    Customizable items

    Cutting DIA. Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Shell HIT. Custom : design as demand, prolong or shortten, increase of efficiency by cleaning more;

    Bottom Custom : single bottom and double bottom design as demand;

    Kelly Box Custom :custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc;

    Bottom Open Mechanic : half-automatic or manul mechanic bottom open system.

    Sizes in Dia

    OD600mm-OD3000mm, other avaliable upon request.

    Sizes in Length

    Normally 600mm /800mm/900mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Straight Auger

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Design as straight type, better for carry soil;

    Double cutter bearing uniform force, can avoid inclined hole;

    Double spiral easy to carry soil, but meet cohensive soil, single spiral is easy to dump spoil;

    Applicable layers: clay, high-weathered layer, gravel etc.

    Customizable ltems

    Cutting DIA. Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Spiral HIT. Custom : design as demand, prolong or shortten, increase amount of per drilling, improve eficiency;

    Spiral Pitch Custom : adjust the spiral pitch according to different working condition;

    Teeth Custom : equiped different teeth, like bullet teeth, flat teeth according to different working condition;

    Key Component Reinforce Custom : strengthen the key component to extend life cycle;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc.

    Sizes in Dia

    OD600mm-OD1500mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Conical Auger

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Location by pilot, conical structure drilling into the rock;

    Double cutter bearing uniform force, can avoid inclined hole;

    Double spiral easy to carry soil, but meet cohensive soil, single spiral is easy to dump spoil;

    Applicable layers:medium weathered rock,bedroc.

    Customizable ltems

    Cutting DIA.Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Spiral HlT. Custom : design as demand, prolong or shortten, increase amount of per drilling, improve eficiency;

    Spiral Pitch Custom : adjust the spiral pitch according to different working condition;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc;

    Key Component Reinforce Custom : strengthen the key component to extend life cycle.

    Sizes in Dia

    OD600mm-OD1500mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Open-type Bucket

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Large inlet of soil, open shell design, easy to dump spoil so increases the drilling efficiency;

    Super strength structure for shell, guide plate, etc, increase the life cycle of bucket;

    Guide strips arranged on the surface of bucket can avoid drilling tool sucked by the pressure;

    Applicable layers: clay ,silt,highly weathered rock.

    Customizable Items

    Cutting DIA. Custom : design various cutting diameter based on demand,lsuch us 9501050 etc;

    Teeth Custom : equiped different teeth, like bullet teeth, flat teeth according to diferent working condition;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc.

    Sizes in Dia

    OD600mm-OD1500mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Core Barrel with Roller Bit

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Cutting ring with rock drilling bits and releases the internal stress of rock;

    Drilling with the method of rolling and squeezing can increases the anti-wear ability of the barre;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Applicable layers: medium or slightly weathered rock, hard or superhard bedrock.

    Customizable ltems

    Cutting DIA. Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Shell HIT. Custom : design as demand, prolong or shortten, increase amount of per drilling, improve efficiency;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc;

    Teeth No. Custom : encrypt the drilling teeth based on demand etc;

    Roller Bits Custom: new roller bits, used roller bits and detachable roller bit design as demand.

    Sizes in Dia

    OD600mm-OD2500mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Core Barrel with Bullet Teeth

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Cutting ring with rock drilling bits and releases the internal stress of rock;

    Rock drilling bits perform stage breaking and drilling;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Applicable layers: backfill layer, medium weathered rock, bedrock.

    Customizable Items

    Cutting DIA. Custom : design various cutting diameter based on demand, like 9501050 etc;

    Custom : design as demand, prolong or shortten, increase amount of per drilling, improve eficiency;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Kelly Box Custom : custom kelly box size based on the kelly bar, like 130*130, 150*150.200*200 etc;

    Teeth No. Custom : encrypt the drilling teeth based on demand etc.

    Sizes in Dia

    OD600mm-OD2500mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Motor

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    The Accurate Braking High Efficiency Electrical Motors with ISO9001 are top-quality products designed for industrial applications that demand high performance and reliability. These motors are built to provide accurate braking with high efficiency, making them ideal for applications that require precise control.

    The ISO9001 certification guarantees that these motors meet the highest quality standards for manufacturing processes, ensuring their reliability and durability. Their efficient design also ensures that they deliver significant energy savings, reducing the overall operating costs of industrial processes.

  • Sale!

    Gearbox

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    1. High quality advanced quality testing equipment.

    2. Green environmental protection. 

    3. High strength precoated sand ensures dimensional stability of the inner cavity.

    4. Excellent raw material.

    5. Professional technical team.

    6. Intelligent units: core making smelting,modelling,post-processing and processing.

    7. HWS/Sinto/Disa Molding line casting. 

    8. Material gray iron and ductile iron of all grade12.

  • Sale!

    Soil Bucket

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Option prolong straight bucket shell can avoid drilling hole inclined;

    Choosing conical shell type can accelerate dumping, increase of efficiency;

    Ventilation pipe shaft inside prevents vacuum; add collar plate according to working conditions;

    Applicable scope: silt, gravel, clay and highly weathered rock.

    Customizable ltems

    Cutting DIA. Custom : design various cutting diameter based on demand, like 9501050 etc;

    Shell HlT. Custom : design as demand, prolong or shortten, increase amount of per drilling, improve eficiency;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Cutter Custom: single cutter and double cutter design as demand;

    Bottom Custom : single bottom and double bottom design as demand;

    Kelly Box Custom : custom kelly box size based on the kelly bar, such us 130*130, 150*150,200*200 etc;

    Bottom Open Mechanic : half-automatic or manul mechanic bottom open system;

    Flat Teeth Custom : equip with V20, FZ80, FZ72,22S, TL18,TL25, etc, as working condition demand.

    Sizes in Dia

    OD600mm-OD3000mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

  • Sale!

    Rock Bucket

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Option half-automatic or manul mechanic bottom open system. Buit-in ventilation pipe;

    Cast pilot with rock drilling bits , arc guide plate teeth arrangement, double unlocking system;

    Staggered arrangement of rock drilling bits;

    Applicable layers: gravel , pebble , highly or medium weathered rock;

    Customizable Items

    Cutting DIA. Custom : design various cutting diameter based on demand, such us 9501050 etc;

    Shell HlT. Custom : design as demand, prolong or shortten, increase amount of per drilling, improve efficiency;

    Small barrel facilitates the coring operation; large barrel performs stage breaking;

    Cutter Custom: single cutter and double cutter design as demand;

    Kelly Box Custom : custom kelly box size based on the kelly bar, like 130*130, 150*150,200*200 etc;

    Bottom Open Mechanic : half-automatic or manul mechanic bottom open system.

    Sizes in Dia

    OD600mm-OD3000mm, other avaliable upon request.

    Sizes in Length

    Normally 1200mm / 1000mm/800mm, other avaliable upon request,prolong or shortten, increase of efficiency by drilling more.

     

  • Sale!

    Casing joints

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    KR product a variety of casing tools such as double wall casing tube, single wall casing tube, casing twister, casing shoes for rotary drill rigs of Bauer, Soilmec, Casagrande, MAIT, IMT, SANY,JUNTAI etc.

    Casing Diameter

    OD620mm-OD2500mm, other avaliable upon request.

  • Sale!

    Casing shoe

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Feature

    Optimal rotation characteristics;

    Fully welded solid wall connection between male joint section and cutting ring;

    Increased wear protection optionally available in the form of vertical wear plates;

    Cutting ring can be removed and replaced when necessary;

    With increased operational demands and for long drilling tools;

    use of the long version of the casing shoe is recommended as the most intense strain occurs on the inner surfaceofthe casing shoe in the area of drilling tool action. At this point, the solid-walled construction of the casing shoeensures a long ensures a long;

    Casing shoes can be fitted with WS tooth holders (WS 39) or weld-on teeth type BR or BH (other types of teeth areavailableon request).

    Casing Diameter

    OD620mm-OD2500mm, other avaliable upon request.

  • Sale!

    Casing pipe

    Piling / Sheet Pile / Pile Foundation $250.00
    Rated 0 out of 5

    Casing is one of most important and commonly used equipment in deep foundation work. It is widely used in deep foundation/bored pile/drill shaft/pillar construction work to protect the shaft work safety. KR Drill supplies a full range of Casings, Casing joints, Casing shoes, and accessories designed to meet the rigorous demands of fully cased pile boring for large diameter and deep foundations in the most difficult soil conditions including hard rock an other complicated geological environments.

    Casing Diameter

    OD620mm-OD2500mm, other avaliable upon request.

  • Sale!

    Customized Kelly bar

    Piling / Sheet Pile / Pile Foundation $25,000.00
    Rated 0 out of 5

    Usually Customized kelly bar is formed by Interlocking kelly bar pipe, Friction kelly bar pipe, Full lock ribs kelly bar pipe or other mix-lock types based on your specific projects complicated formation needs.

    Materials & Technology

    1st-2nd pipe Materials: 27SiMn or 35CrMo undergone quenched-tempered heat treatment;

    3rd-5th pipe Materials: Q345B undergone quenched-tempered heat treatment;

    Kelly drive stub Materials: Soid forging with HRC305-335 and tensile strength 1050 Mpa;

    External pressure key: 35CrMoTi;

    Kelly spring Materials:60Si2Mn.

  • Sale!

    Full lock Kelly bar

    Piling / Sheet Pile / Pile Foundation $25,000.00
    Rated 0 out of 5

    Usually full lock kelly bar is composed of three weld-on ribs continuous concave and convex keys. It especillay for hard ground and frozen oil formation layer.When drilling process, the advantage is force uniform, not easy to stick pipe, particular to improve work efficiency.

    Materials & Technology

    1st-2nd pipe Materials: 27SiMn or 35CrMo undergone quenched-tempered heat treatment;

    3rd-5th pipe Materials: Q345B undergone quenched-tempered heat treatment;

    Kelly drive stub Materials: Soid forging with HRC305-335 and tensile strength 1050 Mpa;

    External pressure key: 35CrMoTi;

    Kelly spring Materials:60Si2Mn.

  • Sale! Interlocking Kelly bar

    Interlocking Kelly bar

    Piling / Sheet Pile / Pile Foundation $25,000.00
    Rated 0 out of 5

    Interlocking Kelly bars are used with piling rigs for drilling in dense sand and gravel and weak to strong rock. The Interlocking Kelly bars manufactured by KR can be fully locked by mechanical locking system on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose.

    Materials & Technology

    1st-2nd pipe Materials: 27SiMn or 35CrMo undergone quenched-tempered heat treatment;

    3rd-5th pipe Materials: Q345B undergone quenched-tempered heat treatment;

    Kelly drive stub Materials: Soid forging with HRC305-335 and tensile strength 1050 Mpa;

    External pressure key: 35CrMoTi;

    Kelly spring Materials:60Si2Mn.

  • Sale!

    Friction Kelly bar

    Piling / Sheet Pile / Pile Foundation $25,000.00
    Rated 0 out of 5

    Friction Kelly bar is another type of kelly bar, which the external key is composed of 3 or 6 wear -resistant strips without lock recesses. This kelly bar can form pressure force when the kelly bar is rotary. can produce peripheral force and the rotary passing down the pressure force, can produce the friction force. This kelly bar has the advantage of operating sample, drilling deep, but with less pressure transmission

    Materials & Technology

    1st-2nd pipe Materials: 27SiMn or 35CrMo undergone quenched-tempered heat treatment;

    3rd-5th pipe Materials: Q345B undergone quenched-tempered heat treatment;

    Kelly drive stub Materials: Soid forging with HRC305-335 and tensile strength 1050 Mpa;

    External pressure key: 35CrMoTi;

    Kelly spring Materials:60Si2Mn.

  • Giken Silent Piler SCU-400M (Used)

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5
  • Bauer BG28 Rotary Drilling Rig

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5
  • Bauer BG40 Drilling Rig (Used)

    Piling / Sheet Pile / Pile Foundation
    Rated 0 out of 5
  • Grove RT9130E (used)Grove RT9130E (used)
  • Bauer Crane Cable winch

    Winch (Bauer) (Used) for sale by owner

    All Terrain Crane
    Rated 0 out of 5
  • Warman Slurry Pump

    Slurry Pump (Warman 6×4) (unused)

    Diaphragm Wall Equipment
    Rated 0 out of 5
  • Dragflow EXHY35
  • Maxbrio RipperMaxbrio Ripper

    Maxbrio Excavator Ripper attachment BR25

    Earthmoving
    Rated 0 out of 5
  • Hydraulic Hammer Rammer 4099 PRO (used)

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5
  • Hydraulic Breaker Rammer 4099 PRO (used)

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5
  • Bauer BE500 DesanderBauer BE500 Desander

    Bauer BE500 Desander (used)

    Aggregate (Quarry, Crushers and Feeders etc)
    Rated 0 out of 5

    Seller-owned, currently in owner’s Singapore yard.

  • Sale! flight auger rod

    Spiral flight auger rod extension rod with high quality

    Mining and Drilling $99.00
    Rated 0 out of 5

    Kimdrill can produce the flight auger rod with different size and length to meet client’s request.

  • Sale! drilling rod

    3M Len extension rod seamless drilling pipe for well drilling

    Mining and Drilling $49.00
    Rated 0 out of 5

    We use seamless steel tube to process the drilling rod for well drilling, mining, quarry etc. Our drilling rods are made with high quality and different length are available as clients request.
    For more details. welcome to contact us freely kiko@kimdrill.com

  • Sale! tricone bits

    Hard rock drilling bits tricone bits roller bits in stock

    Mining and Drilling $999.00
    Rated 0 out of 5

    Kimdrill supplies full range of drilling bits for hard rock drilling.
    Tricone bits can be used to drilling in hard rock more than 100MPA and we offer them with competitive price.
    Any questions, welcome to contact us kiko@kimdrill.com

  • Sale! DTH HAMMER

    Mining tools DTH hammer donw the hole hammer air hammer pneumatic hammer

    Mining and Drilling $120.00
    Rated 0 out of 5

    KIMDRILL manufacture a serious of DTH hammer from 3.5 inch to 12 inch for surface mining, hard rock drilling, well drilling, blast hole drilling, quarry etc.
    For any questions, welcome to contact us freely.
    kiko@kimdrill.com

  • Sale! DTH bits

    Down the hole bits DTH bits air bits for SD hammer

    Mining and Drilling $99.00
    Rated 0 out of 5

    KIMDRILL offer full range of DTH bits with different shank to match up with diverse air hammer. Our DTH bits are widely used in mining, blast hole drilling, well drilling, quarry, oil and gas.
    Any questions, welcome to contact us freely.
    kiko@kimdrill.com

  • Sale! round shank chisel

    Round shank chisel rock auger teeth drill bits B47K22H

    Piling / Sheet Pile / Pile Foundation $8.80
    Rated 0 out of 5

    Hard rock drilling bits with carbide beans for rock drilling bucket and auger
    Model: B47K22H

  • SIP&T Casing AdapterSIP&T Casing Adapter

    Casing Adapter for drilling rigs (used and unused)

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5
  • Bauer HD 1200 Power Pack

    Power Pack Bauer HD 1200 (used)

    Heavy Equipment
    Rated 0 out of 5

    For Sale by Owner

  • BG 40 Bauer Drilling Rig (YOM 2014)BG 40 Bauer Drilling Rig (YOM 2014)

    BG 40 Bauer Drilling Rig (Used) (YOM 2007)

    Drilling Rigs and Piling Rigs
    Rated 0 out of 5

    BG 40 Bauer Drilling Rig (Used) (YOM 2014)

Looking for more? Email us at Sales@EQTYARD.com for a full list

Data Driven Online Construction Marketplace

Buy and Sell Heavy Equipment, Spare Parts  and Construction Building Materials

Why Sell with EQT Yard?

Surplus Stock? Make Fast Cash Not Scrap

Idle equipment, idle parts and surplus materials in storage tend to depreciate and rust over time... only to be turned into scrap. No local demand? Then sell to the rest of the world. Entering a new market and acquiring new customers tend to be high in marketing costs and require large resources. With EQT Yard, you can do so for free with no risks.

Data-Driven Advertising

EQT Yard's Data-Driven Advertising is designed to (1) maximize the reach of your listings to interested buyers; and (2) match your surplus stock with interested buyers worldwide. Identity Protection is also available in such surplus sale.

Easy Financing for buyers

Easy to Buy = Easy to Sell. Easy and quick access to financing means one more reason for buyers to make the purchase. Buyers need only fill up a single form for financing to receive multiple quotes.

Bid for Tenders

Bid for tenders or offer your proposals and quotes. Our Customer Users regularly post their tenders, RFP and RFx for used heavy equipment, equipment parts and building materials. Check the Tenders Board for regular updates of what our Customer Users are looking to buy!

Assurance

Be assured as customers are required to provide payment at the point of sale and contractually bound upon placing their orders. Confidently deal with new customers.

A network of buyers

Improve brand recognition and build relationships with potential buyers so they know who to look for when they are looking to make a purchase. Identity Protection is also available in such surplus sale.

Hassle-Free Delivery for buyers

Convenient and hassle-free delivery options means one more reason for buyers to make the purchase. Buyers need only fill up a single form for delivery to receive multiple quotes.

Gain market insights

Better understand the market through your Dashboard where you can view sales reports, reviews and more.

How Selling on EQT Yard works

Post your Product photos, price and description. OR Bid on a Tender posted by a Buyer. Buyer selects your product/bid and checks out.

Buyer must make payment into secure escrow account designated by EQT Yard upon receiving your Invoice.

Once payment has been received, EQT Yard will provide confirmation to you.

Seller to start manufacturing according to the order and/or prepare for release of Product for pick up.

The secure escrow account will release payment to the Seller after the Buyer picks up the order or after the Pick up Period.

Post/Bid and Sell

Post your Product photos, price and description. OR Bid on a Tender posted by a Buyer.
Buyer selects your product/bid and checks out.

Buyer Pays

Buyer must make payment into secure escrow account designated by EQT Yard upon receiving your Invoice.

Payment Received

Once payment has been received, EQT Yard will provide confirmation to you.

Manufacture and/or release of Product

Seller to start manufacturing according to the order and/or prepare for release of Product for pick up.

Seller gets paid!

The secure escrow account will release payment to you after the Buyer picks up the order or after the Pick up Period.